中文
- 中文
- English
- français
- Deutsch
- русский
- italiano
- español
- português
- 日本語
- 한국의

100Gb QSFP28 ZR4 80Km 1310nm LC Optical Transceiver

100G QSFP28 ZR4 optical transceiver module, support 100Gb/s and up to 80 km transmission on SM fiber, it works in high-speed IDC connection solutions, and so on.

Features

4 lanes MUX/DEMUX design
Support 100GBASE-ZR4 for line rate of 103.125Gbps and OTU4 for line rate of 111.81GbpsLANWDM EML laser and PIN receiver with SOA
Aggregate bandwidth of >100Gbps
Duplex LC connectors
Compliant withIEEE 802.3-2012 Clause 88 standard IEEE 802.3bm CAUI-4 chip to module electrical standard ITU-T G.959.1-2012-02 standard·
Single +3.3V power supply operating
Built-in digital diagnostic functions
Temperature range 0°C to 70°C
RoHS Compliant Part
Support FEC(Forward Error Correction)

现在查询下载

类别

热门产品

产品详细信息

100G ZR4 80km QSFP28 Transceiver Hot Pluggable, Duplex LC Connector, EML+PIN with SOA Single mode DDM

FIBERWDM’s QSFP28 100G ZR4 RQ-100G-ZR4 is designed for 80km optical communication applications. This module contains 4-lane optical transmitter, 4-lane optical receiver and module management block including 2 wire serial inter-face. The optical signals are multiplexed to a single-mode fiber through an industry standard LC connector. A block diagram is shown in Figure 1.

Absolute Maximum Ratings

Parameter	Symbol	Min.	Typical	Max.	Unit
StorageTemperature	TS	-40		+85	°C
SupplyVoltage	VCCT, R	-0.5		4	V
RelativeHumidity	RH	0		85	%

Recommended Operating Environment

Parameter	Symbol	Min.	Typical	Max.	Unit
Case operatingTemperature	TC	0		+70	°C
Supply Voltage	VCCT, R	+3.13	3.3	+3.47	V
Supply Current	ICC		1200	1800	mA
Power Dissipation	PD			6.5	W

Electrical Characteristics(TOP = 0 to 70 °C, VCC= 3.13 to 3.47 Volts

Parameter	Symbol	Min	Typ		Max		Unit	Note
Data Rate per Channel		-	25.78125				Gbps
			27.9525
Power Consumption		-	4		6.5		W
Supply Current	Icc		1.2		1.8		A
Control I/O Voltage-High	VIH	2.0			Vcc		V
Control I/O Voltage-Low	VIL	0			0.7		V
Inter-Channel Skew	TSK				35		Ps
RESETL Duration			10				Us
RESETL De-assert time					100		ms
Power On Time					100		ms
Transmitter
Single Ended Output Voltage Tolerance		0.3		Vcc		V		1
Common mode Voltage Tolerance		15				mV
Transmit Input Diff Voltage	VI	150		1200		mV
Transmit Input Diff Impedance	ZIN	85	100	115
Data Dependent Input Jitter	DDJ		0.3			UI
Receiver
Single Ended Output Voltage Tolerance		0.3		4		V
Rx Output Diff Voltage	Vo	370	600	950		mV
Rx Output Rise and Fall Voltage	Tr/Tf			35		ps		1
Total Jitter	TJ		0.3			UI

Note:

1. 20～80%

Optical Parameters(TOP = 0 to 70°C, VCC = 3.0 to 3.6 Volts)

Parameter	Symbol	Min	Typ	Max		Unit		Ref.
Transmitter
Wavelength Assignment	L0	1294.53	1295.56		1296.59		nm
	L1	1299.02	1300.05		1301.09		nm
	L2	1303.54	1304.58		1305.63		nm
	L3	1308.09	1309.14		1310.19		nm
Side-mode Suppression Ratio	SMSR	30	-		-		dB
Total Average Launch Power	PT	8	-		12.5		dBm
Average Launch Power, each Lane		+2	-		6.5		dBm
Difference in Launch Power between any two Lanes (OMA)		-	-		3		dB
Extinction Ratio	ER	6	-		-		dB
Transmitter Eye Mask Definition {X1, X2, X3, Y1, Y2, Y3}		{0.25, 0.4, 0.45, 0.25, 0.28, 0.4}						1
Optical Return Loss Tolerance		-	-		20		dB
Average Launch Power OFF Transmitter, each Lane	Poff				-30		dBm
Relative Intensity Noise	Rin				-130		dB/HZ
Optical return loss tolerance					20		dB
Transmitter reflectance		-	-		12		dB
Receiver
Total Damage Threshold	THd			5.5		dBm		1
Receiver Sensitivity per Lane	R			-28		dBm
Average Power at Receiver Input, each Lane	R	-28		-7		dBm		1
LOS De-Assert	LOSD			-29		dBm
LOS Assert	LOSA	-40				dBm
LOS Hysteresis	LOSH	0.5				dB

Note

1. Sensitivity is specified at BER@5E-5 with FEC

Order information

Product Number	Data Rate(Gb/s)	Wavelength(nm)	Reach(km)	LD	Tx Power(dBm)	PD	Rx Sens(dBm)	Temperature(℃)
RQ-100G-ZR4	100	1310nm	80	LAN WDM EML	2~6	PIN+SOA	<-28	0~70

相关产品

100G QSFP28 SR4 100m 850nm MPO Optical Transceiver

100G QSFP28 SR4 100m 850nm MPO Optical Transceiver，support 100Gb/s and up to 100m transmission on MM fiber, it works in high-speed IDC connection solutions and so on. Features Compliant with IEEE Std 802.3bm Compliant with SFF-8665 Transmission data rate up to 25 .78125GbpsData rate per channel High Reliability 850nm VCSEL technology Electrically hot-pluggable Single +3 .3V power supply Case temperature range: 0 ~ +70℃ Maximum power consumption 2 .5W Single MPO12 connector RoHS complaint

100G QSFP28 CWDM4 2km LC Optical Transceiver

100G QSFP28 CWDM4 optical transceiver module, support 100Gb/s and up to 2 km transmission on SM fiber, it works in high-speed IDC connection solutions, and so on.

100G QSFP28 LR4 1310nm 10km LC Optical Transceiver

100G QSFP28 LR4 optical transceiver module, support 100Gb/s and up to 10 km transmission on SM fiber, it works in high-speed IDC connection solutions, and so on. Features 4 lanes MUX/DEMUX design Integrated LAN WDM TOSA / ROSA for up to 10 km reach over SMF Support 100GBASE-ER4 for line rate of 103.125Gbps and OTU4 for line rate of 111.81Gbps Aggregate bandwidth of >100Gbps Duplex LC connectors Compliant with IEEE 802.3-2012 Clause 88 standard IEEE 802.3bm CAUI-4 chip to module electrical standard ITU-T G.959.1-2012-02 standard· Single +3.3V power supply operating Built-in digital diagnostic functions Temperature range 0°C to 70°C RoHS Compliant Part Support FEC(Forward Error Correction)

100Gb QSFP28 ER4 40Km 1310nm LC Optical Transceiver

100G QSFP28 ER4 optical transceiver module, support 100Gb/s and up to 40 km transmission on SM fiber, it works in high-speed IDC connection solutions, and so on. Features: 4 lanes MUX/DEMUX design Support 100GBASE-ER4 for line rate of 103.125Gbps. Integrated LAN WDM TOSA / ROSA for up to 40 km reach over SMF. Aggregate bandwidth of >100Gbps Duplex LC connectors Compliant withIEEE 802.3-2012 Clause 88 standard IEEE 802.3bm CAUI-4 chip to module electrical standard ITU-T G.959.1-2012-02 standard· Single +3.3V power supply operating Built-in digital diagnostic functions Temperature range 0°C to 70°C RoHS Compliant Part Support FEC(Forward Error Correction)

100Gb/s QSFP28 DWDM Dual CS Adaptor Transceiver

100G QSFP28 DWDM optical transceiver module, support 48*100Gb/s DWDM System and up to 80 km transmission on SM fiber, it works in high-speed IDC connection solutions.

100GBASE-SR Bi-Directional QSFP28 850/900nm 100m DOM LC MMF Optical Transceiver Module

100G QSFP28 BIDI optical transceiver module is a pluggable optical transceiver with a duplex LC connector interface for short-reach data communication and interconnect applications using Multi-Mode Fiber (MMF). It offers customers a compelling solution that enables reuse of their existing 10 Gb duplex MMF infrastructure for migration to 100 Gigabit Ethernet connectivity.

100GBASE-LR Bi-Directional QSFP28 1280/1310nm 20km LC SM Optical Transceiver Module

100G QSFP28 BIDI optical transceiver module is a pluggable optical transceiver with a Simplex LC connector interface for long-reach data communication and interconnect applications using one core Single-Mode Fiber (SMF).

100Gb/s QSFP28 DWDM PAM4 Dual LC Transceiver

100G QSFP28 DWDM optical transceiver module, support 48*100Gb/s DWDM System and up to 80 km transmission on SM fiber, it works in high-speed IDC connection solutions.

联系我们